Safety Information; Intended Application - ABB GAA330-M Operating Instructions Manual

Safety information

Intended application

Intended application
Safety information
Requirements for safe operation
Personnel qualifications
Special information and precautions
GAA330-M EMISSION MONITORING SYSTEM
The analyzer system is designed for continuous measurement of concentra-
tions of specific components in gases or vapor.
Any other use is not as specified. The specified use also includes taking note
of this operating instruction.
The analyzer system must not be used to measure flammable gases or
combustible gas/air or gas/oxygen mixtures. The analyzer system must not
be installed in hazardous locations.
The analyzer system interior remains free of explosive atmosphere during
normal operation. Therefore, the integration of explosion protection
measures inside the analyzer system is not required.
In order to operate in a safe and efficient manner the analyzer system should
be properly handled and stored, correctly installed and set-up, properly op-
erated and correctly maintained.
Only persons familiar with the installation, set-up, operation and mainte-
nance of comparable devices and certified as being capable of such work
should work on the device.
These include
The content of this operating instruction,
•
The safety information affixed to the analyzer system,
•
The applicable safety precautions for installing and operating electrical
•
devices,
Safety precautions for working with gases, acids, condensates, etc.
•
| OI/GAA330-M-EN REV. C 7