ABB GAA330-M Operating Instructions Manual page 23

Mounting
GAA330-M EMISSION MONITORING SYSTEM
Connection between analyzer cabinet and ship control room
Analog signal 4 to 20 mA SO
Analog signal 4 to 20 mA CO
Alarm and malfunction messages
1 x digital contact malfunction measurement system
1 x digital contact calibration measurement system
1 x digital contact back flushing probe active
1 x digital contact measurement range changeover SO
Ethernet 10/100/1000 BASE-T interfaces
Modbus RTU RS485 or RS232 (optional)
PROFIBUS RS485 (optional)
Screws and nuts to mount the analyzer cabinet on the wall
A suitable lifting device (crane, block and tackle, lifting truck, etc.) and lifting
gear are required for transport and installation of the analyzer cabinet.
| OI/GAA330-M-EN REV. C
2
2
23
2 x 1 mm 2 (shielded)
2 x 1 mm 2 (shielded)
12 x 1 mm 2
2