Setting The Time Zone, Date And Time - ABB GAA330-M Operating Instructions Manual

60

Setting the time zone, date and time

Menu path
Procedure
Definitions
Daylight-saving time
Condition as delivered
Accept the time settings
GAA330-M EMISSION MONITORING SYSTEM
MENU → Configure → System → Date/Time
Parameter Explanation
Time Zone The time zone can be selected either from the GMT (Green-
wich Mean Time) values or from the continent/country/city
list.
Date must be entered in month/day/year format. Enter year
Date
with 4 digits.
Time must be entered in hour: minute:second format. Enter
Time
seconds, too.
GMT = Greenwich Mean Time
CET = Central European Time = GMT + 1 hour
CEST = Central European Daylight-saving Time = GMT + 2 hours
The analyzer system is automatically set to daylight-saving time.
Note: This applies only when the time zone has been selected from the conti-
nent/country/city list and not from the GMT values list.
The analyzer system is factory-set to the GMT+1 time zone.
Press the softkey SET TIME to accept the modified time settings.
| OI/GAA330-M-EN REV. C