Installation Preparation; Installing The Analyzer System - ABB GAA330-M Operating Instructions Manual

16

Installation preparation

Installing the analyzer system

Notes
Installation – Overview
GAA330-M EMISSION MONITORING SYSTEM
ABB recommends having the analyzer system installed by ABB personnel.
•
When installing the analyzer system, in addition to this operating in-
•
struction, comply with the information contained in the drawings set.
If there is shipping damage which points to improper handling file a
•
damage claim with the shipper (railway, mail or freight carrier) within
seven days.
Make sure the enclosed accessories are not lost.
•
Keep the packaging material for future shipping needs.
•
1 Prepare the gas sampling probe installation site.
2 Prepare the analyzer cabinet installation site.
3 Install the gas sampling probe and filter unit.
4 Install the sample gas line.
5 Install the back-purging unit (if applicable).
6 Install the analyzer cabinet.
7 Install the instrument air and test gas supply (if applicable).
8 Connect the gas lines to the analyzer cabinet.
9 Connect the electrical leads to the analyzer cabinet.
| OI/GAA330-M-EN REV. C