Completion Status - Seagate Viper 200 Scsi Interface Manual

SCSI Commands

Completion Status

optional page that has not been created will result in a check condition LUN NOT
READY AUXILIARY MEMORY NOT ACCESSIBLE.
Page ID Access Description
FFFFFFh RO All pages.
FFFFFEh RO Page of pages.
000001h RO Cartridge Manufacturer's Information
000002h RO Media Manufacturer's Information (optional)
0000F0h- RO Drive Manufacturer Support (cleaning tape only)
0000FFh
000101h RO Initialization Data
000102h RO Tape Write Pass
000103h RO Tape Directory
000104h RO EOD Information
000105h RO Cartridge Status and Tape Alert Flags
000106h RO Mechanism Related (optional)
000107h RO Suspended Append Writes
000108h- RO Usage Information (optional)
00010Bh
0001FCh- RO Cleaning Usage Information (optional, cleaning tape only)
0001FFh
000200h RW Application Specific (optional)
Code Message Description
• The drive is ready to perform any appropriate command.
00h Good
Status • The drive remains in any previously set mode.
• The tape position is not changed.
02h
Check Use the Request Sense command to retrieve status information. Possible
Condition Sense Keys are:
Code
04h
05h
06h
Message Description
Hardware Error Drive hardware failure detected.
Illegal Request The Command Descriptor Block is invalid.
Unit Attention The cartridge was changed or the drive was re-
set prior to this command.
Page 83