Table of Contents
Advertisement
SCSI Commands
Completion Status
encountered. Any Write command issued within Early Warning and successfully
completed, finishes with a Check Condition and the EOM bit set.
Code
Message
Description
• The SCSI data has been transferred to the data buffer.
00h
Good
Status
• The drive remains in any previously set mode.
02h
Check
Use the Request Sense command to retrieve status information. Possible
Condition
Sense Keys are:
Code
02h
03h
04h
05h
06h
07h
0Dh
Message
Description
Not Ready
No cartridge is in the drive.
Media Error
Unrecoverable data error encountered.
Hardware Error
Parity error on the SCSI bus or drive hardware
failure.
Illegal Request
The Command Descriptor Block is invalid.
Unit Attention
The cartridge was changed, or the drive was re-
set prior to this command.
Write Protect
The tape is write-protected; check the cartridge
before continuing.
Volume Overflow
The Write command completed with data in the
buffer because the end-of-partition was encoun-
tered.
Page 121
Advertisement
Table of Contents
