Table of Contents
Advertisement
Page 72
Completion Status
Code
Message
00h
Good Status
02h
Check Condition
Description
• The drive is ready to perform any appropriate command.
• The drive remains in any previously set mode.
• The tape position is not changed.
Use the Request Sense command to retrieve status information. Possi-
ble Sense Keys are:
Code
Message
04h
Hardware Error
05h
Illegal Request
06h
Unit Attention
LTO SCSI Interface Manual
Description
Parity error on the SCSI bus or drive
hardware failure.
The Command Descriptor Block is invalid.
The cartridge was changed, or the drive
was reset prior to this command.
Advertisement
Table of Contents
