Completion Status - Seagate Viper 200 Scsi Interface Manual

Page 32

Completion Status

Code Message
00h Good Status
02h Check Condition
Description
♦ The tape is not moved; the current position is maintained.
♦ The drive remains in any previously set modes.
♦ The drive is ready to perform any appropriate command.
Use the Request Sense command to retrieve status information. Possi-
ble Sense Keys are:
Code Message
02h Not Ready
04h Hardware Error
05h Illegal Request
LTO SCSI Interface Manual
Description
No cartridge is in the drive.
Parity error on the SCSI bus or drive
hardware failure.
The Command Descriptor Block is inva-
lid.