SCSI Commands
Completion Status
Field
Bytes
Capacity
12-15
Assigning Or-
16-23
ganization
Density Name
24-31
Description
32-51
Reserved
Code
Message
Description
• The drive is ready to perform any appropriate command.
00h
Good
• The drive remains in any previously set mode.
Status
• The drive accepts commands from any Initiator.
• The tape position is not changed.
02h
Check
Use the Request Sense command to retrieve status information. Possible
Condition
Sense Keys are:
Code
04h
05h
06h
Bits
Description
Can be one of the following nominal values:
100,000 MB
50,000 MB
30,000 MB
10,000 MB
8 bytes of ASCII data, "LTO-CVE "
8 bytes of ASCII data. Can be one of the following:
"U-18-100"
"U-18-50 "
"U-18-30 "
"U-18-10 "
20 bytes of ASCII data. Can be one of the following:
"Ultrium 1/8T 100GB "
"Ultrium 1/8T 50GB "
"Ultrium 1/8T 30GB "
"Ultrium 1/8T 10GB "
All reserved bits are 0.
Message
Description
Hardware Error
Parity error on the SCSI bus or drive hardware
failure.
Illegal Request
The Command Descriptor Block is invalid.
Unit Attention
The cartridge was changed, or the drive was re-
set prior to this command.
Page 95