Page 88
Completion Status
Code
Message
Description
• The drive is ready to perform any appropriate command.
00h
Good
Status
• The drive remains in any previously set mode.
• The tape is not moved.
02h
Check
Use the Request Sense command to retrieve status information. Possible
Condition
Sense Keys are:
Code
02h
04h
05h
06h
Message
Description
Not Ready
No cartridge is in the drive.
Hardware Error
Drive hardware failure detected.
Illegal Request
The CDB contains an invalid bit.
Unit Attention
The cartridge was changed, or the drive was re-
set prior to this command.
LTO SCSI Interface Manual