SCSI Commands
Completion Status
Code
Message
Description
•
00h
Good Status
•
Note: If Immed is 1, then Good Status only indicates that the command is
valid.
Use the Request Sense command to retrieve status information. Possible
02h
Check
Sense Keys are:
Condition
Code
02h
04h
05h
06h
07h
The drive remains in any previously set modes.
The drive is ready to perform any appropriate command.
Message
Description
Not Ready
No cartridge is in the drive.
Hardware Error
Parity error on the SCSI bus or drive hard-
ware failure detected.
Illegal Request
Both the Immed bit and the Link bits are 1, or
the Command Descriptor Block is invalid.
Unit Attention
The cartridge was changed or the drive was
reset prior to this command.
Write Protect
The cartridge is write protected.
Page 21