Table of Contents
Advertisement
Page 116
Completion Status
The space-to-EOD function is useful in support of user-defined directories located at
the end of recorded data.
•
If physical EOT is encountered while spacing to end of data, Check Condition
Status is returned and Extended Sense is set to Medium Error.
•
If unrecoverable data error is encountered, Check Condition Status is returned,
Extended Sense Key is set to Medium Error, and Extended Sense Valid bit is
set, indicating Residual Length is non-zero.
Code
Message
Description
• The drive is ready to perform any appropriate command.
00h
Good
• The drive remains in any previously set mode.
Status
• The tape is positioned on the EOT side if space forward and on the BOT side
if space reverse.
02h
Check
Use the Request Sense command to retrieve status information. Possible Sense
Condition
Keys are:
Code
02h
03h
04h
05h
06h
08h
Message
Description
Not Ready
No cartridge is inserted in the drive.
Media Error
Unrecoverable data error encountered while per-
forming a Space command.
Hardware Error
Drive hardware failure detected.
Illegal Request
The Command Descriptor Block is invalid.
Unit Attention
The cartridge was changed or the drive was reset
prior to this command.
Blank Check
EOD was encountered while executing a Space
forward.
LTO SCSI Interface Manual
Advertisement
Table of Contents
