Table of Contents
Advertisement
Page 80
Field Descriptions
Completion Status
Field
Bytes
Bits
Reserved
Maximum
1-3
Block
Length
Minimum
4-5
Block
Length
Code
Message
Description
• The drive is ready to perform any appropriate command.
00h
Good
Status
• The drive remains in any previously set mode.
• The tape position is not changed.
02h
Check
Use the Request Sense command to retrieve status information. Possible
Condition
Sense Keys are:
Code
02h
04h
05h
06h
Description
All reserved bits must be 0.
Always FFFFFFh, indicating a maximum block length of 2
Always 0001h, indicating a minimum block length of 1.
Message
Description
Not Ready
No cartridge is in the drive.
Hardware Error
Parity error on the SCSI bus or drive hardware
failure.
Illegal Request
The Command Descriptor Block is invalid.
Unit Attention
The cartridge was changed, or the drive was re-
set prior to this command.
LTO SCSI Interface Manual
24
-1 bytes.
Advertisement
Table of Contents
