Collect Device Health Data; Configure Intelliflow; System Resources Chart - Digi IX14 User Manual

Monitoring

Collect device health data

You can enable or disable the collection of device health data to upload to Digi Remote Manager.
1. From the menu, click Configuration.
2. Open Monitoring > Device Health.
3. Configure the following:
Enable
Health sample interval
4. Click Save.

Configure IntelliFlow

IntelliFlow keeps track of network data usage and traffic information and displays the information in a
series of charts available the local web UI. To use IntelliFlow, the Digi IX14 must be powered on and
you must have access to the local web UI. Once you enable IntelliFlow, the Dashboard option appears
in the main navigation menu.
Note When Intelliflow is enabled, it adds an estimated 50MB of data usage for the device by reporting
the metrics to Digi Remote Manager.
To enable or disable IntelliFlow:
1. From the menu, click Configuration.
2. Open Monitoring > IntelliFlow and set the following options:
Enable: Enable or disable IntelliFlow.
Zone: Specify the firewall zone for the network interface clients to monitor. The default zone,
Internal, is appropriate for most environments.
3. Click Save.
The Dashboard option is included in the local web UI main menu.

System resources chart

To generate a System resources chart:
1. If you have not already done so, enable IntelliFlow. See
2. From the menu, click Dashboard.
3. Click System Resources.
Digi IX14 User Guide
Collect device health data
Configure IntelliFlow.
62