Review Digi Ix14 Default Settings; Configure Multiple Devices Using Profiles - Digi IX14 User Manual

Digi Remote Manager
3. You'll receive an email with login instructions.
4. From the Digi Remote Manager mobile app, click Log in and log into your new account.
To register a new device:
1. From the menu, select Install a device with a QR or bar code and scan the installation QR
code on the label.
2. Follow the prompts to complete your Digi IX14 registration.
Digi Remote Manager registers your Digi IX14 and adds it to your Digi Remote Manager device list. You
can now manage the device remotely using Digi Remote Manager.

Review Digi IX14 default settings

The following table lists factory default settings for the Digi IX14.
Central
management
Interface
priorities
Modem
configuration
Network
settings
Security
policies
Services
Monitoring

Configure multiple devices using profiles

Digi recommends you take advantage of Digi Remote Manager profiles to manage multiple Digi IX14
routers. Typically, if you want to provision multiple Digi IX14 routers:
1. Using the Digi IX14 local web UI, configure one Digi IX14 router to use as the model
configuration for all subsequent Digi IX14s you need to manage.
2. Register the configured Digi IX14 in your Digi Remote Manager account.
3. In Digi Remote Manager, create a profile based on the configured Digi IX14.
4. Apply the profile to the Digi IX14 routers you need to configure.
Digi Remote Manager provides multiple methods for applying profiles to registered devices. You can
also include site-specific settings with a profile to override settings on a device-by-device basis.
Digi IX14 User Guide
Digi Remote Manager enabled as the central management service
n
Modem (cellular) is WAN interface with metric of 3
n
LAN (Ethernet) with metric of 5
n
SIM failover after 5 attempts
n
LAN subnet of 192.168.2.1/24
n
DHCP enabled
n
Source NAT enabled
n
(outbound traffic)
Packet filtering allows all outbound traffic
n
SSH, web admin, and local admin access enabled
n
Bluetooth service enabled to allow the Digi Remote Manager mobile app to
n
automatically register using the QR code on the device label. You can disable
Bluetooth service after the device is provisioned.
Device heath metrics uploaded to Digi Remote Manager at 60 minute
n
interval.

Review Digi IX14 default settings

59