Step 6: Configure Cellular Connection Using The Web Interface; Step 7: Add Your Digi Ix14 To Your Digi Remote Manager Account; Next Steps - Digi IX14 User Manual

Quick start with Digi IX14 local web UI
c. Log into the Digi IX14:
User name: Use the default user name: root
Password: Use the unique password printed on the bottom label of the device (or the
printed label included in the package)
The Digi IX14 local web UI main menu appears.

Step 6: Configure cellular connection using the web interface

a. From the navigation pane, click Configuration.
b. Open Modem and use default setting Any SIM for the Match SIM by option.
c. If you are using a PIN-locked SIM, enter the PIN for the SIM.
d. Open APN list > APN and enter the APN for the SIM.
e. Click Save.
The WWAN service LED flashes yellow when the cellular connection is coming up. See

Step 7: Add your Digi IX14 to your Digi Remote Manager account

a. From the web interface, click Manage Device in the top right of the display.
b. Log into Digi Remote Manager. (If you created an account in
web UI, look for the Digi Remote Manager email that provides your login credentials.)
c. Click Device Management.
d. Click Add Devices.
Select MAC address and provide the Ethernet MAC address for your device.
For Install Code, enter the default password on the printed label packaged with your device.
(The same default password is also shown on the label affixed to the bottom of the device.)
a. Click Add.
b. Click OK.
Digi Remote Manager adds your Digi IX14 to your account and it appears in the Device Management
view.

Next steps

Congratulations! You have completed the Quick start.

To manage and configure your Digi IX14 remotely
using Digi Remote Manager, see
Manager
.

To manage and configure your Digi IX14 locally
using the local web interface, see
IX14 local web UI
Digi IX14 User Guide
Step 6: Configure cellular connection using the web interface
Digi Remote
Access the Digi
.
Digi IX14
Quick start with Digi IX14 local
LEDs.
26