Nortel BCM50e Configuration page 254

254 Appendix H Command Interpreter
Table 64 IP commands
Command
lan
httpd
icmp
status
discovery
ifconfig
ping
route
status
add
addiface
addprivate
drop
N0115789
edit <0: first|1:
second|2: third>
<0:from
ISP|1:usr-def|2:n
one> [IP addr
ess if choosing
1]
edit <0: first|1:
second|2: third>
<0:from
ISP|1:usr-def|2:D
NS Relay|3: n
one> [IP address
if choosing 1]
display
debug [on|off]
<iface> [on|off]
[iface] [ipaddr]
[broadcast <addr>
|mtu
<value>|dynamic]
<hostid>
[if]
<dest_addr|defaul
t>[/<bits>]
<gateway>
[<metric>]
<dest_addr|defaul
t>[/<bits>]
<gateway>
[<metric>]
<dest_addr|defaul
t>[/<bits>]
<gateway>
[<metric>]
<host addr> [/
<bits>]
Description
Configures the system DNS server settings.
Configures the LAN DNS server settings.
Shows the LAN DNS server settings.
Enables or disables the HTTP debug flag.
This command currently does not work.
Displays the ICMP statistics counter.
Sets the ICMP router discovery flag.
Configures a network interface.
Pings a remote host.
Displays the routing table.
Adds a route.
Adds an entry to the routing table for the
specified interface.
Adds a private route.
Drops a route.