Ip Commands; Table 64 Ip Commands - Nortel BCM50e Configuration

Table 63 Ether Commands
Command
set
spt

IP commands

Table 64
preceded by

Table 64 IP commands

Command
address
alias
aliasdis
arp
status
attpret
force
dhcp
client
status
dns
query
system
<port> <type>
lists and describes the IP commands. Each of these commands must be
. For example, type
ip
[addr]
<iface>
<0|1>
<iface>
<on|off>
<on|off>
<iface>
release
renew
[option]
address <ip
address>
name <host name>
display
BCM50e Integrated Router Configuration - Advanced
Appendix H Command Interpreter 253
Description
Sets physical port to a specific channel.
Displays channel setting stored in SPT.
to display the host IP address.
ip address
Description
Displays the host IP address.
Sets an alias for the specified interface.
Disables or enables the alias for the specified
interface.
Displays an interface's IP Address Resolution
Protocol status.
Allows or disallows the device to receive ARP
from a different network or not.
Enables or disables the ARP timeout function.
Releases the DHCP client IP address.
Renews the DHCP client IP address.
Displays the DHCP status.
Displays the domain name of an IP address.
Displays the IP address of a domain name.
Configures the system DNS server settings.
Shows the system DNS server settings.