Table 46 Menu 26.1 Schedule Set Setup - Nortel BCM50e Configuration

If a connection is already established, your Business Secure Router does not drop
it. After the connection is dropped manually or it times out, then that remote node
cannot be triggered until the end of the Duration.

Table 46 Menu 26.1 Schedule Set Setup

Field Description
Active Press [SPACE BAR] to select Yes or No. Choose Yes and
press [ENTER] to activate the schedule set.
Start Date Enter the start date when you wish the set to take effect in
year-month-date format. Valid dates are from the present to
2036-February-5.
How Often Press the [SPACE BAR] and then [ENTER] to select Once
or Weekly. Both these options are mutually exclusive. If
Once is selected, then all weekday settings are N/A. After
Once is selected, the schedule rule deletes automatically
after the scheduled time elapses.
Once: If you selected Once in the How Often field above, enter
the date the set should activate here in year-month-date
Date
format.
Weekday: If you selected Weekly in the How Often field above, select
the days when the set should activate (and recur) by going
Day
to that days and pressing [SPACE BAR] to select Yes. After
you complete this menu, press [ENTER] to exit.
Start Time Enter the start time when you wish the schedule set to take
effect in hour-minute format.
Duration Enter the maximum length of time this connection is
allowed, in hour-minute format.
Action Forced On means that the connection is maintained
whether or not there is a demand call on the line and
persists for the time period specified in the Duration field.
Forced Down means that the connection is blocked
whether or not there is a demand call on the line.
Enable Dial-On-Demand means that this schedule permits
a demand call on the line. Disable Dial-On-Demand
means that this schedule prevents a demand call on the
line.
After you complete this menu, press [ENTER] at the prompt "Press ENTER to Confirm..."
to save your configuration, or press [ESC] at any time to cancel.
BCM50e Integrated Router Configuration - Advanced
Chapter 18 Call scheduling 189
Example
Yes
2000-01-01
Once
2000-01-01
Yes
No
N/A
09:00
08:00
Forced On