Nortel BCM50e Configuration page 113

Table 26 Menu 15.3: Trigger Port setup description
Field Description
End Port Enter a port number or the ending port number in a range of port
numbers.
Trigger The trigger port is a port (or a range of ports) that causes (or
triggers) the Business Secure Router to record the IP address of
the LAN computer that sent the traffic to a server on the WAN.
Start Port Enter a port number or the starting port number in a range of
port numbers.
End Port Enter a port number or the ending port number in a range of port
numbers.
Press [ENTER] at the message "Press ENTER to Confirm..." to
save your configuration, or press [ESC] at any time to cancel.
Chapter 9 Network Address Translation (NAT) 113
BCM50e Integrated Router Configuration - Advanced
Example
7170
7070
7070