Table of Contents
Advertisement
124 Chapter 11 Filter configuration
Figure 58 Menu 21.1.1.1: TCP/IP Filter Rule
Press Space Bar to Toggle.
Table 29
Table 29 TCP/IP Filter Rule Menu fields
Field
Active
IP Protocol
IP Source Route
Destination
N0115789
Menu 21.1.1.2 - TCP/IP Filter Rule
Filter #: 1,2
Filter Type= TCP/IP Filter Rule
Active= Yes
IP Protocol= 0
Destination: IP Addr=
IP Mask=
Port #=
Port # Comp= None
Source: IP Addr=
IP Mask=
Port #=
Port # Comp= None
TCP Estab= N/A
More= No
Action Matched= Check Next Rule
Action Not Matched= Check Next Rule
Press ENTER to Confirm or ESC to Cancel:
describes how to configure your TCP/IP filter rule.
Description
Press [SPACE BAR] and then [ENTER] to select Yes
to activate the filter rule or No to deactivate it.
Protocol refers to the upper layer protocol, for
example, TCP is 6, UDP is 17 and ICMP is 1. Type a
value between 0 and 255. A value of 0 matches ANY
protocol.
Press [SPACE BAR] and then [ENTER] to select Yes
to apply the rule to packets with an IP source route
option. Otherwise the packets must not have a
source route option. The majority of IP packets do
not have source route.
IP Source Route= No
Log= None
Options
Yes
No
0-255
Yes
No
Advertisement
Table of Contents
