Main Menu - Nortel BCM50e Configuration

Table 2 Main menu commands
Operations
Move the
cursor
Entering
information
Required fields <? >
N/A fields
Save your
configuration
Exit the SMT

Main menu

After you enter the password, the SMT displays the Business Secure Router Main
Menu, as shown in
Keystrokes
[ENTER] or [UP] or
[DOWN] arrow keys
Fill in, or press
[SPACE BAR], then
press [ENTER] to
select from choices.
<N/A>
[ENTER]
Type 99, then press
[ENTER].
Figure 4. Not all models have all the features shown.
BCM50e Integrated Router Configuration - Advanced
Chapter 2 Introducing the SMT 41
Descriptions
Within a menu, press [ENTER] to move to the
next field. You can also use the [UP] or [DOWN]
arrow keys to move to the previous or the next
fields, respectively.
When you are at the top of a menu, press the
[UP] arrow key to move to the bottom of a menu.
There are two types of fields. The first requires
you to type in the appropriate information. The
second allows you to cycle through the available
choices by pressing [SPACE BAR].
All fields with the symbol <?> must be filled in
order be able to save the new configuration.
Some of the fields in the SMT will show a <N/A>.
This symbol refers to an option that is Not
Applicable.
Save your configuration by pressing [ENTER] at
the message "Press ENTER to confirm or ESC to
cancel". Saving the data on the screen will take
you, in most cases, to the previous menu.
Make sure you save your settings in each screen
that you configure.
Type 99 at the main menu prompt and press
[ENTER] to exit the SMT interface.