Nortel BCM50e Configuration page 256

256 Appendix H Command Interpreter
Table 64 IP commands
Command
enable
exemptZone
customize
tredir
failcount
partner
target
N0115789
[0:no/1:yes]
display
actionFlags
[type(1-3)][enabl
e/disable]
add [ip1] [ip2]
delete [ip1]
[ip2]
reset
display
actionFlags
[act(1-7)]
[enable/disable]
logFlags
[type(1-3)][enabl
e/disable]
add [string]
[trust/untrust/
keyword]
delete [string]
[trust/untrust/
keyword]
reset
<count>
<ipaddr>
<ipaddr>
Description
Enables or disables content filtering.
Displays content filtering exempt zone
information.
Enables or disables content filtering exempt
zone action flags that determine to which IP
addresses content filtering applies.
Sets a range of IP addresses to be in the
exempt zone.
Removes a range of IP addresses from the
exempt zone.
Returns the exempt zone settings to the
previous configuration.
Uses the customize commands to configure
content filtering for trusted Web sites,
forbidden Web sites and keyword blocking.
Displays the content filtering customize action
flags.
Sets the content filtering customize action
flags.
Sets the content filtering customize log flags.
Adds a trusted Web site, forbidden Web site
or keyword blocking string.
Deletes a trusted Web site, forbidden Web
site or keyword blocking string.
Returns to the default configuration.
Sets the number of times that the device can
ping the target without a response before
forwarding traffic to the backup gateway.
Sets the traffic redirect backup gateway IP
address.
Sets the IP address that the device uses to
test WAN accessibility.