Manual Setup - Emerson Rosemount 928 Reference Manual

Configuration
August 2018
20. Select Next to accept the service reminder date or enter another date.
21. When the gas concentration reading stabilizes at or near the target gas
22. Detach the calibration tubing from the regulator on the target gas source and from
2.9

Manual setup

Manual setup includes all available configuration settings. You may use it to change
specific settings configured during initial setup without using the Guided Setup menus.
You may also use it to configure advanced optional settings.
About this task
Note
Emerson
this manual using Emerson AMS Trex Device Communicator. The menus are identical to
those found in other Field Communicators, but are navigated using touch screens rather
than fast keys. Refer to the manual for your handheld communicator device for more
information.
66
The Service Reminder screen is displayed if a service reminder is configured and
enabled.
Refer to Service reminders
concentration level, shut off the target gas flow at the regulator.
the IP filter inlet on the bottom of the Rosemount 628.
™
developed the Field Communicator manual setup configuration procedures in
for more information.
Reference Manual
00809-0100-4928
Rosemount 928