Configuration
August 2018
11. On the Alarm Output screen, select one of the following:
12. Select OK.
Configure local alarm output using AMS Device Configurator
Complete the following steps to configure local alarm outputs using an AMS Device
Configurator.
Procedure
1. In the AMS Device Manager pane, double-click the device icon.
96
•
Measurement Value Only: If you select this option, only gas concentration alerts
above the specified threshold trigger the local alarm. This is the default option.
•
All Measurement Alerts: If you select this option, all gas concentration alerts
trigger the local alarm.
Reference Manual
00809-0100-4928
Rosemount 928