Danfoss VLT DriveMotor FCP 106 Design Manual page 33

System Integration
≥ the value specified above. If necessary,
circuit power S
sc
consult the distribution network operator.
Other power sizes can be connected to the public supply
network by consultation with the distribution network
operator.
Compliance with various system level guidelines:
The harmonic current data in Table 3.3 to Table 3.5 are
listed in accordance with IEC/EN 61000-3-12 regarding the
power drive systems product standard. These data may be
used:
MG03M202
Design Guide
•
•
Danfoss A/S © 06/2016 All rights reserved.
As the basis for calculation of the influence of
harmonic currents on the supply system.
For the documentation of compliance with
relevant regional guidelines: IEEE 519 -1992; G5/4.
3 3
31