Serial Communication (Fieldbus) Networks; Vlt ® Memory Module Mcm 101 - Danfoss VLT DriveMotor FCP 106 Design Manual

Product Overview
Control terminals
2 2
12 20 55
20 27 29 42 45
Illustration 2.7 Control Terminals
Terminal Function
number
12 +24 V output –
18 Digital input
19 Digital input
20 Com
27 Digital input/
output
29 Digital input/
output/pulse
input
50 +10 V output –
53 Analog input *0–10 V/0–20 mA/
54 Analog input *0–10 V/0–20 mA/
55 Com
42 10 bit
45 10 bit
1, 2, 3 Relay 1
4, 5, 6 Relay 2
Table 2.1 Control Terminal Functions
* Indicates default setting.
NOTICE
PNP/NPN is common for terminals 18, 19, 27, and 29.
2.1.5 Serial Communication (Fieldbus)
Networks
These protocols are embedded in the frequency converter:
•
BACnet MSTP
•
Modbus RTU
•
FC Protocol
14
®
VLT DriveMotor FCP 106/FCM 106
BUS TER.
OFF ON
61 68 69
50 53 54 55
Configuration Factory
setting
–
*PNP/NPN Start
*PNP/NPN No operation
– –
*PNP/NPN Coast inverse
*PNP/NPN Jog
–
Ref1
4–20 mA
Ref2
4–20 mA
– –
*0–20 mA/4–20 mA/DO Analog
*0–20 mA/4–20 mA/DO Analog
1, 2 NO 1, 3 NC [9] Alarm
4, 5 NO 4, 6 NC [5] Drive
running
Danfoss A/S © 06/2016 All rights reserved.
2.2 VLT ®
Memory Module MCM 101
®
The VLT Memory Module MCM 101 is a small memory
plug containing data such as:
•
Firmware.
•
SIVP file.
•
Pump table.
•
Motor database.
•
Parameter lists.
The frequency converter comes with the module installed
from the factory.
1
1 ®
VLT Memory Module MCM 101
Illustration 2.8 Location of Memory Module
If the memory module becomes defect, it does not prevent
the frequency converter from working. The warning LED
on the lid flashes, and a warning shows in the LCP (if
installed).
Warning 206, Memory module indicates that either a
frequency converter runs without a memory module, or
that the memory module is defect. To see the exact reason
for the warning, refer to parameter 18-51 Memory Module
Warning Reason.
A new memory module can be ordered as a spare part.
Ordering number: 134B0791.
MG03M202