Fcm 106 Motor Specifications - Danfoss VLT DriveMotor FCP 106 Design Manual

®
Specifications
VLT DriveMotor FCP 106/FCM 106
Control card, 10 V DC output
Terminal number 50
10.5 V ±0.5 V
Output voltage
Maximum load 25 mA

6.8 FCM 106 Motor Specifications

Motor output (U, V, W)
Output voltage 0–100% of supply voltage
+
Output frequency, asynchronous motor 0–200 Hz (VVC ), 0–400 Hz (u/f )
+
Output frequency, PM motor 0–390 Hz (VVC PM)
Switching on output Unlimited
Ramp times 0.05–3600 s
Thermistor input (at motor connector)
6 6
Fault: >2.9 kΩ, no fault: <800 Ω
Input conditions
70 Danfoss A/S © 06/2016 All rights reserved. MG03M202