Table of Contents
Advertisement
Objectives
Objectives
This document describes how to install and configure the PA-MC-2T3+ Multi-Channel T3 port adapter
PA-MC-2T3+ (=), hereafter referred to as the PA-MC-2T3+, which is used in the following platforms:
•
•
•
•
•
Organization
This document contains the following chapters:
Section
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Related Documentation
Your router or switch and the Cisco IOS software running on it contain extensive features and
functionality, which are documented in the following resources:
•
PA-MC-2T3+ Multi-Channel T3 Port Adapter Installation and Configuration
viii
Cisco 7200 series routers, consisting of the two-slot Cisco 7202, four-slot Cisco 7204 and
Cisco 7204VXR, and the six-slot Cisco 7206 and Cisco 7206VXR
Cisco 7301 router
Cisco 7304 PCI Port Adapter Carrier Card in the Cisco 7304 router
Cisco 7401ASR router
VIP in Cisco 7500 series and Cisco 7000 series routers with the 7000 Series Route Switch Processor
(RSP7000) and 7000 Series Chassis Interface (RSP7000CI)
Title
Overview
Preparing for Installation
Removing and Installing
Port Adapters
Configuring Unchannelized mode for
the Cisco PA-MC-2T3+
Configuring Channelized mode for
the Cisco PA-MC-2T3+
Cisco IOS software:
For configuration information and support, refer to the modular configuration and modular
command reference publications in the Cisco IOS software configuration documentation set that
corresponds to the software release installed on your Cisco hardware.
You can access Cisco IOS software configuration and hardware installation and maintenance
Note
documentation on the World Wide Web at http://www.cisco.com,
http://www-china.cisco.com, or http://www-europe.cisco.com.
Description
Describes the PA-MC-2T3+ and its LED
displays, cables, and receptacles.
Describes safety considerations, tools required,
and procedures you should perform before the
actual installation.
Describes the procedures for installing and
removing PA-MC-2T3+ port adapters and cables
in the supported platforms.
Provides instructions for configuring the
channelized mode for the PA-MC-2T3+.
Provides instructions for configuring the
unchannelized mode for the PA-MC-2T3+.
Preface
OL-3526-05
Advertisement
Table of Contents
