Objectives; Organization; Related Documentation - Cisco PA-POS-2OC3 Installation And Configuration Manual

Objectives

Objectives
This document describes how to install and configure the PA-POS-2OC-3 two-port Packet-over-SONET
(POS) port adapter, hereafter referred to as the PA-POS-2OC3, which is used in the following platforms:
•
•
•
•
•
•
•
Note The Cisco 7206 VXR router can be used as a router shelf in a Cisco AS5800 universal access server. For
more information about the Cisco 7206 VXR as a router shelf, see the Cisco AS5800 Universal Access
Server documentation listed in the

Organization

This document contains the following chapters:
:
Section
Chapter 1
Chapter 2
Chapter 3
Chapter 4

Related Documentation

Your router or switch and the Cisco IOS software running on it contain extensive features and
functionality, which are documented in the following resources:
•
PA-POS-2OC3 Two-Port Packet-over SONET Port Adapter Installation and Configuration
iv
Cisco 7200 VXR routers, which consist of the four-slot Cisco 7204VXR router and the six-slot
Cisco 7206VXR router
Cisco 7201 router
Cisco 7301 router
Cisco 7304 PCI port adapter carrier card in the Cisco 7304 router
Cisco 7401ASR router
Cisco 7500 series routers, which consist of the five-slot Cisco 7505, the seven-slot Cisco 7507, and
the thirteen-slot Cisco 7513 routers.
Cisco 7600 series routers, which consist of the three-slot Cisco 7603, the six-slot Cisco 7606, the
nine-slot Cisco 7609, and the thirteen-slot Cisco 7613 routers, using FlexWAN and Enhanced
FlexWAN modules.
Title
Overview
Preparing for Installation
Removing and Installing
Port Adapters
Configuring the PA-POS-2OC3
Cisco IOS software:
"Related Documentation" section on page
Description
Describes the PA-POS-2OC3 and its LEDs and cables.
Provides supporting information about addressing,
networks, and SONET.
Describes safety considerations, tools required, and
procedures you should perform before the actual
installation.
Provides instructions for installing a port adapter in the
supported platforms and for connecting cables.
Provides instructions for configuring your port adapter
on the supported platforms.
Preface
iv.
OL-3028-06