Table of Contents
Advertisement
Preface
This preface describes the objectives and organization of this document and explains how to find
additional information on related products and services. This preface contains the following sections:
•
•
•
•
•
Document Revision History
The Document Revision History table below, beginning with version OL-3502-04, records technical
changes to this document.
Document Version
OL-3502-04
Objectives
This document describes how to install and configure the PA-E3 serial port adapters (PA-E3 and
PA-2E3), hereafter referred to as the PA-E3 which are used in the following platforms:
•
•
•
•
•
•
•
OL-3502-04
Document Revision History, page vii
Objectives, page vii
Organization, page viii
Related Documentation, page viii
Obtaining Documentation, Obtaining Support, and Security Guidelines, page xi
Date
April, 2007
Catalyst 5000 family switches with the Route Switch Module (RSM)/second-generation Versatile
Interface Processor (VIP2)
Catalyst 6000 family FlexWAN module in the Catalyst 6000 family switches
Cisco 7100 series routers, consisting of the Cisco 7120 series and Cisco 7140 series
Cisco 7200 series routers and Cisco 7200 VXR routers, consisting of the two-slot Cisco 7202,
four-slot Cisco 7204 and Cisco 7204VXR, and the six-slot Cisco 7206 and the Cisco 7206VXR
Cisco uBR7200 series universal broadband routers, consisting of the three-slot Cisco uBR7223 and
the six-slot Cisco uBR7246 and Cisco uBR7246VXR.
Cisco 7201 router
Cisco 7301 router
Change Summary
Adds Cisco 7201 router information.
PA-E3 Serial Port Adapter Installation and Configuration
vii
Advertisement
Table of Contents
