Cisco PA-2FE-TX Installation And Configuration Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Adapter
  5. PA-2FE-TX
  6. Installation and configuration manual
Cisco PA-2FE-TX Installation And Configuration Manual

Cisco PA-2FE-TX Installation And Configuration Manual

Two-port fast ethernet port adapter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PA-2FE-TX and PA-2FE-FX Two-Port Fast
Ethernet Port Adapter Installation and
Configuration
Product Number: PA-2FE-TX=, PA-2FE-FX=
Platforms Supported: Cisco 7100 Series, Cisco 7200 Series, Cisco uBR7200
Series routers, Cisco 7301 router, Cisco 7304 PCI Port Adapter Carrier Card in
the Cisco 7304 router, Cisco 7401ASR router, and VIP in the Cisco 7500 Series
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-3474-06

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PA-2FE-TX and is the answer not in the manual?

Questions and answers

Related Manuals for Cisco PA-2FE-TX

Summary of Contents for Cisco PA-2FE-TX

  • Page 1 Platforms Supported: Cisco 7100 Series, Cisco 7200 Series, Cisco uBR7200 Series routers, Cisco 7301 router, Cisco 7304 PCI Port Adapter Carrier Card in the Cisco 7304 router, Cisco 7401ASR router, and VIP in the Cisco 7500 Series Americas Headquarters Cisco Systems, Inc.
  • Page 2 OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. CCVP, the Cisco Logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.;...

  • Page 3: Table Of Contents

    Cisco 7100 Series Routers Slot Numbering Cisco 7200 Series Routers Slot Numbering Cisco uBR7200 Series Router Slot Numbering Cisco 7301 Router Slot Numbering Cisco 7304 Router Slot Numbering 1-10 PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...
  • Page 4 Cisco uBR7200 Series Routers—Removing a Port Adapter Cisco uBR7200 Series Routers—Installing a Port Adapter Cisco 7301 Router—Removing and Installing a Port Adapter Cisco 7304 PCI Port Adapter Carrier Card—Removing and Installing a Port Adapter Cisco 7401ASR Router—Removing and Installing a Port Adapter 3-12 Cisco 7500 Series Router VIP—Removing and Installing a Port Adapter...
  • Page 5 Using the show version or show hardware Commands 4-10 Using the show diag Command 4-13 Using the show interfaces Command 4-16 Using the ping Command to Verify Network Connectivity 4-18 PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...
  • Page 6 Contents PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...

  • Page 7: Document Revision History

    November, 2006 Correcting the RJ-45 pinout information. Objectives This document describes how to install and configure the PA-2FE-TX and PA-2FE-FX two-port Fast Ethernet port adapters (PA-2FE-TX(=) and PA-2FE-FX(=), hereafter referred to as the PA-2FE, which is used in the following platforms: Cisco 7100 series routers, consisting of the Cisco 7120 series and Cisco 7140 series •...

  • Page 8: Organization

    Configuring the PA-2FE Provides instructions for configuring the PA-2FE on the supported platforms. Related Documentation Your router and the Cisco IOS software running on it contain extensive features and functionality, which are documented in the following resources: Cisco IOS software: •...
  • Page 9 For hardware installation and configuration information (including the Cisco 7206 or – Cisco 7206VXR as a router shelf in a Cisco AS5800 Universal Access Server), refer to the hardware installation documents for Cisco AS5800 at the following URL: http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/as5800/index.htm For information on network processing engines or network services engines, refer to the –...

  • Page 10: Obtaining Documentation

    Preface Obtaining Documentation Regulatory Compliance and Safety Information for Cisco 7200 Series Routers at the following – URL: http://www.cisco.com/univercd/cc/td/doc/product/core/7206/3419pnc6.htm#20224 Regulatory Compliance and Safety Information for the Cisco uBR7200 Series Routers at the – following URL: http://www.cisco.com/univercd/cc/td/doc/product/cable/cab_rout/ub72rcsi.htm Regulatory Compliance and Safety Information for the Cisco 7301 Internet Router at the –...

  • Page 11: Product Documentation Dvd

    The Product Documentation DVD is a library of technical product documentation on a portable medium. The DVD enables you to access installation, configuration, and command guides for Cisco hardware and software products. With the DVD, you have access to the HTML documentation and some of the PDF files found on the Cisco website at this URL: http://www.cisco.com/univercd/home/home.htm...

  • Page 12: Reporting Security Problems In Cisco Products

    Modifications to or updates about Cisco products are announced in Cisco Product Alerts and Cisco Field Notices. You can receive Cisco Product Alerts and Cisco Field Notices by using the Product Alert Tool on Cisco.com. This tool enables you to create a profile and choose those products for which you want to receive information.

  • Page 13: Obtaining Technical Assistance

    Use the Cisco Product Identification Tool to locate your product serial number before submitting a Note request for service online or by phone. You can access this tool from the Cisco Technical Support & Documentation website by clicking the Tools & Resources link, clicking the All Tools (A-Z) tab, and then choosing Cisco Product Identification Tool from the alphabetical list.

  • Page 14: Submitting A Service Request

    Cisco engineer. The TAC Service Request Tool is located at this URL: http://www.cisco.com/techsupport/servicerequest For S1 or S2 service requests, or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.
  • Page 15 Cisco products that are sold through channel partners. It is updated twice a year and includes the latest Cisco channel product offerings. To order and find out more about the Cisco Product Quick Reference Guide, go to this URL: http://www.cisco.com/go/guide...
  • Page 16 Preface Obtaining Additional Publications and Information PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...

  • Page 17: Overview

    The PA-2FE provides two 10/100-Mbps, 10/100BASE-T Fast Ethernet/Inter-Switch Link (ISL) interfaces and supports both full-duplex and half-duplex operation. Refer to the “Fast Ethernet Overview” section on page 1-2 for additional information. Both models of the PA-2FE (PA-2FE-TX and PA-2FE-FX) are shown in Figure 1-1 Figure 1-2. Figure 1-1 PA-2FE-TX—Faceplate View...

  • Page 18: Fast Ethernet Overview

    Cable specification Category 5 , 22 to 24 62.5/125 multimode optical fiber Maximum segment length 100 m 412 m (half-duplex) Maximum segment length 100 m 2000 m (full-duplex) PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...
  • Page 19 Topology Star/hub Star/hub 1. EIA/TIA-568 or EIA-TIA-568 TSB-36 compliant. 2. Cisco does not supply Category 5 UTP RJ-45 cables. However, they are available commercially. 3. Data Terminal Equipment (DTE to DTE), see Figure 1-3. 4. DTE to Repeater to DTE, see Figure 1-3.

  • Page 20: Leds

    1. When an RJ-45 or SC port is active. Receptacles, Cables, and Pinouts The two interface receptacles on the PA-2FE are a single RJ-45 connection (on the PA-2FE-TX) or an SC-type optical-fiber connection (on the PA-2FE-FX). Each connection supports IEEE 802.3u interfaces compliant with the 100BASE-X and 10/100BASE-T standards.
  • Page 21 Category 5, UTP cable pairs 4/5 and 7/8. Common-mode line termination reduces the contributions to electromagnetic interference (EMI) and susceptibility to common-mode sources. Wire pairs 4/5 and 7/8 are passively terminated in the RJ-45 100BASE-TX port circuitry in the PA-2FE-TX. Depending on your RJ-45 interface cabling requirements, use the pinouts in...

  • Page 22: Network Management

    SC connector (one required for both transmit and receive), and Figure 1-9 shows the simplex SC connector (two required, one each for transmit and receive) used for PA-2FE-FX optical-fiber connections. Cisco does not supply these multimode optical-fiber cables; they are available from a commercial supplier. Figure 1-8...

  • Page 23: Port Adapter Slot Locations On The Supported Platforms

    Note documented in this guide. Cisco 7100 Series Routers Slot Numbering The PA-2FE can be installed in port adapter slot 3 in Cisco 7120 series routers, and in port adapter slot 4 in Cisco 7140 series routers. Figure 1-10 shows a Cisco 7120 with a port adapter installed in slot 3.

  • Page 24: Cisco 7200 Series Routers Slot Numbering

    Cisco uBR7246VXR router. The port adapter slots are numbered slot 1 and slot 2 for the Cisco uBR7246VXR router and slot 1 for the Cisco uBR7223. (Slot 0 is always reserved for the Fast Ethernet port on the I/O controller—if present.)

  • Page 25: Cisco 7301 Router Slot Numbering

    Cable modem card slot 6 Cisco 7301 Router Slot Numbering Figure 1-14 shows the front view of a Cisco 7301 router with a port adapter installed. There is only one port adapter slot in a Cisco 7301 router. Figure 1-14 Cisco 7301 Router with a Port Adapter Installed—Front View...

  • Page 26: Cisco 7304 Router Slot Numbering

    AT M 73 00 PA CA RR IER The Cisco 7304 PCI port adapter carrier card installs in Cisco 7304 router module slots 2 through 5. See Figure 1-15 for module slot numbering on a Cisco 7304 router. PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration...

  • Page 27: Cisco 7401Asr Router Slot Numbering

    Port Adapter Slot Locations on the Supported Platforms Cisco 7401ASR Router Slot Numbering Figure 1-17 shows the front view of a Cisco 7401ASR router with a port adapter installed. There is only one port adapter slot in a Cisco 7401ASR router. Figure 1-17 Cisco 7401ASR Router with a Port Adapter Installed—Front View...

  • Page 28: Identifying Interface Addresses

    Syntax Cisco 7120 series routers Port-adapter-slot-number/interface-port-number Port adapter slot—always 3 Interface port—0 or 1 Cisco 7140 series routers Port-adapter-slot-number/interface-port-number Port adapter slot—always 4 Interface port—0 or 1 PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration 1-12 OL-3474-06...

  • Page 29: Cisco 7120 Router And Cisco 7140 Router Interface Addresses

    Port adapter slot—always 0 or 1 Interface port—0 or 1 In Cisco 7200 series routers and Cisco uBR7200 series routers, port adapter slot 0 is reserved for the Note Fast Ethernet port on the I/O controller, if present. Cisco 7120 Router and Cisco 7140 Router Interface Addresses This section describes how to identify the interface addresses used for the PA-2FE in Cisco 7120 router and the Cisco 7140 router.

  • Page 30: Cisco Ubr7200 Series Routers Interface Addresses

    1-15.) The port adapter slot number is the same as the module slot number. The interface address for port 0 on the PA-2FE, in which the Cisco 7304 PCI port adapter carrier card is installed in Cisco 7304 router module slot 3, would be numbered 3/0.

  • Page 31: Vip Interface Addresses For The Cisco 7500 Series Routers

    This section describes how to identify the interface addresses used for the PA-2FE on a VIP in Cisco 7500 series routers. Although the processor slots in the seven-slot Cisco 7507 and the thirteen-slot Cisco 7513 and Cisco Note 7576 are vertically oriented and those in the five-slot Cisco 7505 are horizontally oriented, all Cisco 7500 series routers use the same method for slot and port numbering.
  • Page 32 Chapter 1 Overview Identifying Interface Addresses PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration 1-16 OL-3474-06...

  • Page 33: Chapter 2 Preparing For Installation

    • VIP (for installation in Cisco 7500 series chassis only) • Cisco 7304 PCI port adapter carrier card (for installation in Cisco 7304 routers only) • Cables appropriate for the PA-2FE interfaces (RJ-45 and multimode optical-fiber cables are not •...

  • Page 34: Software And Hardware Requirements

    2. The PA-2FE can be used in the VIP2, VIP4, and VIP6-80 in all Cisco 7500 series routers using a Route Switch Processor (RSP). 3. The specific VIP2 models recommended for the PA-2FE in all Cisco 7500 series router, are VIP2-40(=), which has 2 MB of SRAM and 32 MB of DRAM, and VIP2-50(=), which has 4 to 8 MB of SRAM and 32 to 128 MB of SDRAM;...

  • Page 35: Safety Guidelines

    Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla. SÄILYTÄ NÄMÄ OHJEET PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...
  • Page 36 Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo. GUARDE ESTAS INSTRUÇÕES PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...
  • Page 37 Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...
  • Page 38 Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...
  • Page 39 Chapter 2 Preparing for Installation Safety Guidelines PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...

  • Page 40: Electrical Equipment Guidelines

    Do not perform any action that creates a potential hazard to people or makes the equipment unsafe; • carefully examine your work area for possible hazards such as moist floors, ungrounded power extension cables, and missing safety grounds. PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...

  • Page 41: Telephone Wiring Guidelines

    Never attempt to remove the printed circuit board from the metal carrier. • For safety, periodically check the resistance value of the antistatic strap. The measurement should be Caution between 1 and 10 megohms (Mohms). PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...

  • Page 42: Fcc Class A Compliance

    You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures: Turn the television or radio antenna until the interference stops.

  • Page 43: Chapter 3 Removing And Installing Port Adapters

    Caution Handling Port Adapters Always handle the port adapter by the carrier edges and handle; never touch the port adapter components Caution or connector pins. (See Figure 3-1.) PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...

  • Page 44: Online Insertion And Removal

    VIP from the router and then install or replace port adapters as required. If a blank port adapter is installed in the Cisco 7304 PCI port adapter carrier card or VIP on which you want to install a new port adapter, you must first remove the Cisco 7304 PCI port adapter carrier card or VIP from the router and then remove the blank port adapter.

  • Page 45: Warnings And Cautions

    Cisco uBR7200 Series Routers—Installing a Port Adapter, page 3-8 • Cisco 7301 Router—Removing and Installing a Port Adapter, page 3-9 • Cisco 7304 PCI Port Adapter Carrier Card—Removing and Installing a Port Adapter, page 3-9 • PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...
  • Page 46 Cisco 7401ASR Router—Removing and Installing a Port Adapter, page 3-12 • Cisco 7500 Series Router VIP—Removing and Installing a Port Adapter, page 3-13 • If a port adapter lever or other retaining mechanism does not move to the locked position, the port adapter is not completely seated in the midplane.

  • Page 47: Cisco 7100 Series-Removing And Installing A Port Adapter

    Step 8 After the port adapter is properly seated, lock the port adapter retaining mechanism. PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...

  • Page 48: Cisco 7200 Series-Removing And Installing A Port Adapter

    Step 7 After the port adapter is properly seated, lock the port adapter lever. (See A.) PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...

  • Page 49: Cisco Ubr7200 Series Routers-Removing A Port Adapter

    With the port adapter halfway (unlocked position) out of the slot, disconnect all cables from the port adapter. After disconnecting the cables, pull the port adapter from its chassis slot. PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...

  • Page 50: Cisco Ubr7200 Series Routers-Installing A Port Adapter

    Step 4 After the port adapter is properly seated, lock the port adapter lever or retention clip, depending on your system. (See illustration on preceding page.) PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...

  • Page 51: Cisco 7301 Router-Removing And Installing A Port Adapter

    Cisco 7304 PCI Port Adapter Carrier Card—Removing and Installing a Port Adapter You can install one single-width port adapter in a Cisco 7304 PCI port adapter carrier card. This section provides step-by-step instructions for removing and installing a port adapter in a Cisco 7304 PCI port adapter carrier card.
  • Page 52 Step 4 the Cisco 7304 PCI port adapter carrier card that hold the port adapter in place. They are at the top left and top right of the port adapter slot and are recessed about an inch, as shown in C of Figure 3-2.
  • Page 53 CA RR IER 7 3 0 0 - C C - P A 73 00 -C C- PA STA TU S 730 0 PA CA RR IER AT M PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration 3-11 OL-3474-06...

  • Page 54: Cisco 7401Asr Router-Removing And Installing A Port Adapter

    Step 4 To insert the port adapter, locate the port adapter slot guides inside the Cisco 7401ASR router. They are near the top, and are recessed about 1/2 inch. (See B.) Caution The port adapter must slide into the slot guides under the chassis lid.

  • Page 55: Cisco 7500 Series Router Vip-Removing And Installing A Port Adapter

    Use the ejector levers to seat the VIP in the interface processor slot. Tighten the captive installation screws on the VIP. (See C.) PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration 3-13 OL-3474-06...

  • Page 56: Connecting A Pa-2Fe Rj-45 Or Sc Cable

    To continue your PA-2FE port adapter installation, you must install the port adapter’s interface cables. The following instructions apply to all supported platforms. RJ-45 and SC-type fiber-optic cables are not available from Cisco; they are available from commercial cable vendors.
  • Page 57 Removing and Installing Port Adapters Connecting a PA-2FE RJ-45 or SC Cable Figure 3-4 Connecting PA-2FE-FX SC Cables—Horizontal Orientation PA-2FE-FX Simplex (2) To repeater Duplex (1) To repeater PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration 3-15 OL-3474-06...
  • Page 58 Chapter 3 Removing and Installing Port Adapters Connecting a PA-2FE RJ-45 or SC Cable PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration 3-16 OL-3474-06...

  • Page 59: Chapter 4 Configuring The Pa-2Fe

    When you enter the correct password, the system displays the privileged-level system prompt (#): Router# To configure the new interfaces, proceed to the “Configuring the Interfaces” section on page 4-2. PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...

  • Page 60: Configuring The Interfaces

    At the privileged-level prompt, enter configuration mode and specify that the console terminal is the Step 2 source of the configuration commands, as follows: Router# configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)# PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...
  • Page 61 The example is for interface 0 and interface 1 on a (fastethernet) and slot/port PA-2FE in port adapter slot 1. (port-adapter-slot-number/ Router(config)# interface fastethernet 1/0 interface-port-number) Router(config-if)# shutdown Router(config-if)# interface fastethernet 1/1 Router(config-if)# shutdown Ctrl-Z Router# PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...
  • Page 62 Verify that new interfaces are now in the correct state (shut down) using the Step 5 show interfaces command (followed by the interface type and interface address of the interface) to display the specific interface. Table 4-2 provides examples. PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...
  • Page 63 1. (port-adapter-slot-number/ Router# show interfaces fastethernet 1/0 interface-port-number) fastethernet 1/0 is administratively down, line protocol is down [Additional display text omitted from this example] PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...

  • Page 64: Performing A Basic Configuration

    For complete descriptions of configuration commands and the configuration options available for Fast Ethernet interfaces, refer to the appropriate software documentation. PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...
  • Page 65 Cisco 7304 (fastethernet) and Cisco 7304 PCI port adapter carrier card in module routers slot-number/port-number slot 3 of a Cisco 7304 router. (module-slot-number/ Router(config)# interface fastethernet 3/0 interface-port-number) Router(config-if)# PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...

  • Page 66: Checking The Configuration

    Router(config-if)# slot-number/interface-port-number). The PA-2FE is automatically configured with 100-Mbps interfaces. If Cisco IOS software detects that Note the PA-2FE is connected to a 10-Mbps interface, the PA-2FE will automatically be configured to run at 10-Mbps. Use the speed [10 | 100 | auto] command to manually set the Fast Ethernet speed.

  • Page 67: Using Show Commands To Verify The New Interface Status

    Displays status information about a Router# show interfaces fastethernet 3/1/0 interface-processor- specific type of interface (for slot-number/port-adapter-slot-number/ example, fastethernet) on a VIP in a interface-port-number Cisco 7500 series router PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration OL-3474-06...

  • Page 68: Using The Show Version Or Show Hardware Commands

    The outputs that appear in this document may not match the output you receive when running these commands. The outputs in this document are examples only. Cisco 7100 Series Routers Following is an example of the show version command from a Cisco 7140 series router with the PA-2FE: Router# show version Cisco Internetwork Operating System Software IOS (tm) EGR Software (C7100-JK2O3S-M)Copyright (c) 1986-2001 by cisco Systems, Inc.
  • Page 69 8192K bytes of Flash internal SIMM (Sector size 256K). Configuration register is 0x0 Cisco 7200 Series Routers The following is an example of the show version command from a Cisco 7200 series router with the PA-2FE: Router# show version Cisco Internetwork Operating System Software IOS (tm) 7200 Software (C7200-JS-M), Version 12.1(20000701:015939) [343]...
  • Page 70 4096K bytes of Flash internal SIMM (Sector size 256K). Configuration register is 0x0 VIP in Cisco 7500 Series Routers The following is an example of the show version command from a Cisco 7500 series router with the PA-2FE: Router# show version Cisco Internetwork Operating System Software IOS (tm) RSP Software (RSP-JSV-M), Version 12.1(20000701:015939) [485]...

  • Page 71: Using The Show Diag Command

    Display the types of port adapters installed in your system (and specific information about each) using the show diag slot command, where slot is the port adapter slot in a Cisco 7100 series routers, Cisco 7200 series router, Cisco uBR7200 series routers, Cisco 7300 series routers, or the Cisco 7401ASR router and the interface processor slot in a Cisco 7500 series router with a VIP.
  • Page 72 0x60:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x70:FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF For complete command descriptions and examples for the Cisco 7200 series routers, refer to the Note publications listed in the “Related Documentation”...
  • Page 73 The show diag slot command displays specific port adapter information, as shown in the example of a PA-2FE-TX in port adapter bay 0 and a PA-2FE-FX in port adapter bay 1 of a VIP2 installed in interface processor slot 3:...

  • Page 74: Using The Show Interfaces Command

    For complete descriptions of interface commands and the configuration options available for Cisco 7100 series, Cisco 7200 series, Cisco uBR7200 series, the Cisco 7301 router, the Cisco 7401ASR, and the VIP interfaces in the Cisco 7500 routers, refer to the publications listed in the “Related...
  • Page 75 1 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out For the Cisco 7206 router shelves, the show interfaces command requires a shelf number in the format Note show interfaces type shelf number/port adapter slot/port.

  • Page 76: Using The Ping Command To Verify Network Connectivity

    Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.0.0.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/4 ms Router# Router#ping 10.0.0.2 PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration 4-18 OL-3474-06...
  • Page 77 If the connection fails, verify that you have the correct IP address for the destination and that the device is active (powered on), and repeat the ping command. PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration 4-19...
  • Page 78 Chapter 4 Configuring the PA-2FE Checking the Configuration PA-2FE-TX and PA-2FE-FX Two-Port Fast Ethernet Port Adapter Installation and Configuration 4-20 OL-3474-06...

This manual is also suitable for:

Pa-2fe-fx

Table of Contents