Cisco PA-MC-2T3+ Installation And Configuration Manual page 40

FCC Class A Compliance
You can determine whether your equipment is causing interference by turning it off. If the interference
stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment
causes interference to radio or television reception, try to correct the interference by using one or more
of the following measures:
• Turn the television or radio antenna until the interference stops.
Move the equipment to one side or the other of the television or radio.
•
Move the equipment farther away from the television or radio.
•
Plug the equipment into an outlet that is on a different circuit from the television or radio. (That is,
•
make certain the equipment and the television or radio are on circuits controlled by different circuit
breakers or fuses.)
The Cisco PA-MC-2T3+ port adapter has been designed to meet these requirements. Modifications to
Note
this product that are not authorized by Cisco Systems, Inc., could void the various approvals and negate
your authority to operate the product.
PA-MC-2T3+ Multi-Channel T3 Port Adapter Installation and Configuration
2-10
Chapter 2 Preparing for Installation
OL-3526-05