Load Default; Firmware Version - Sungrow SG30KU User Manual

User Manual

10.9.3 Load Default

All history information will be unrecoverable cleared and all parameters will
return to the default value except the protection parameters and time once
the "load default" operation is performed.
Main Screen(Press ENTER)→Menu screen(Press
→Enter password(Press ENTER)→Sys-param(Press ENTER, Press
default(Press ENTER)
A password confirmation screen will occur. Press
move cursor right and Press
111111.
Press ENTER to confirm "load default".

10.9.4 Firmware Version

Main Screen(Press
ENTER) → Enter password(Press ENTER) → Sys-param(Press ENTER, Press
×4 )→Firmware version (Press ENTER)
Inverter shows detailed firmware information, including
LCD version and DSP version.
The firmware version information is read only.
to input the password
ENTER )→Menu screen(Press
10 Operation of LCD Display
×3)→Set-param(Press ENTER)
to
×3)→Set-param(Press
×3)→Load
77