User Manual
10.7
Start and Stop Inverter
Main Screen(Press ENTER)
Press
to choose "Start"/"Stop" and
press
ENTER
to confirm the choice.
Press
ENTER
to confirm.
10.8
Input Parameter Settings Password
The parameter settings are protected by the password. If you want to set the
inverter's parameters, you have to input the correct password.
1.
Press
ENTER
2.
Press
to move the cursor to "Set-param" menu item and confirm by
pressing
ENTER
3.
A password confirmation screen will occur. Press
to move cursor right and Press
password 111111.
→
Menu(Press
to enter into "Menu" screen.
.
10 Operation of LCD Display
→
×2)
Start/Stop(Press ENTER)
to input the
75