Load Default; Checking Firmware Version - Sungrow SG60KTL User Manual

10 Operation of LCD Display

Press to move the cursor and press
value. Press ENTER
The positive symbol "+" can be changed to the
negative symbol "-".
The adjustment range is from -9999 to +9999 kWh.
(Energy-adj value)= (Real measured value) - (E-tot
reading value).

10.9.4 Load Default

All history information will be unrecoverable cleared and all parameters will
return to the default value except the protective parameters and time once
the "load default" operation is performed.
Main Screen (Press ENTER)→Menu (Press ×3)→Set-param(Press ENTER)→Enter
password (Press ENTER)→Sys-param(Press ENTER, Press ×3)→Load default (Press
ENTER)
Press ENTER to confirm "load default".

10.9.5 Checking Firmware Version

Main Screen (Press ENTER)→Menu (Press
password (Press ENTER) → Sys-param(Press ENTER, Press ×4) → Firmware
version(Press ENTER)
Inverter shows detailed firmware information,
including LCD version and DSP version.
The firmware version information is read only.
70

to confirm setting.
to change
×3)→Set-param(Press ENTER)→Enter

User Manual