User Manual
10.9.4 Load Default
All history information will be unrecoverable cleared and all parameters will
return to the default value except the protective parameters and time once
the "load default" operation is performed.
Main Screen (Press ENTER)→Menu (Press ×3)→Set-param(Press ENTER)→Enter
password (Press ENTER)→Sys-param(Press ENTER, Press ×3)→Load default (Press
ENTER)
ENTER
Press
to
default".
10.9.5 Checking Firmware Version
Main Screen (Press ENTER)→Menu (Press
password (Press ENTER) → Sys-param(Press ENTER, Press ×4) → Firmware
version(Press ENTER)
Inverter
shows
firmware information, including
LCD version and DSP version.
The
firmware
information is read only.
10.10 Running Parameter Setting
10.10.1 Main Screen of Run-param
Main Screen (Press ENTER)→Menu (Press
password (Press ENTER, Press )→Run-param (Press ENTER)
confirm
"load
detailed
Firmware version
Device Type: SG36KTL-M
version
SN: A1405170001
Ver:
DSP_SG36KTL-M_V11_V1_A_M
LCD_SG36KTL-M_V03_A_M
Load default
Confirm resume setting?
×3)→Set-param(Press ENTER)→Enter
×3)→Set-param (Press ENTER)→Enter
10 Operation of LCD Display
71