Running [Received] Mail; How To Process Received Mail (Settings) - Neopost IS-430 User Manual

DELTA2_UK.book Page 46 Vendredi, 27. juin 2008 11:47 11

Running [Received] Mail

3.5

Running [Received] Mail

In this Section
This section describes the parameter settings and mail handling sequences for mail
processes that use the [Received] type of imprint, to:
3
Print the date on received mail, and/or
•
Print 'Received' on received mail.
•
See also
To choose the type of imprint to use for each type of mail process, see Choosing
•
a Type of Imprint p.25).
Sequence of Settings
The procedure below outlines steps in a recommended sequence to process mail.
You must begin with selecting the Type of imprint to gain access to the corresponding
parameters and be able to run mail.

How to Process Received Mail (Settings)

How to Process
Received Mail
(Settings)
46
Make sure you have completed the preparation steps mentioned
in Preparing and Starting your Work Session p.27.
Compulsory settings:
1
Make sure you are on the home screen of the [Received]
type of imprint.
The type of imprint is indicated at the top of the home screen
as illustrated.
2
Check or change the type of imprint.
Press to access the imprint screen:
The type of imprint is indicated on line 2 of the screen.
To select an option in the screen:
Highlight the option using the arrow keys
Then always press
To change the type of imprint, select the Type line, press
[OK] and then select [RCVD] in the Type of imprint screen
and press [OK].
Additionally, you can configure the printed elements
from the Imprint screen as follows:
and
to validate your selection.