DELTA2_UK.book Page 172 Vendredi, 27. juin 2008 11:47 11
Auto Feeder Jamming
Some envelopes are blocked in the Auto Feeder.
Possible causes
Mailpiece is too thick.
•
Mail size is incorrect.
•
Too many envelopes are on the
•
feed deck.
•
Envelopes are not properly in-
serted on the feed platform.
Sealing is ON while feeding closed
•
envelopes.
11
172
The mail transport path should be regularly cleaned. See Clea-
ning the Mail Path p.164.
Actions
1 Unblock the Automatic Feeder as
indicated below.
2 Correct the cause:
Mail sizes: see Mail Specifi-
cations p.20.
Envelope stack height: 101 mm
max.
Envelope stacking: see Using
the Feeder p.32
1 Feed closed envelopes only with
sealing OFF.
2 Check that already closed en-
velopes are properly sealed at the
leading edge. Incompletely closed
envelopes will jam.