Preparing The X-Ray Generator - Kodak RVG 6500 IPS System User's Installation Manual

Preparing the X-Ray Generator

To prepare the x-ray generator, follow these steps:
Press the remote control button of the selected RVG control box to access the RVG Acquisition
1
interface.
(Optional) Press on the remote control button several times to pre-orient the sensor orientation.
The acquired image is displayed with the last selected orientation on the Imaging Window.
(Optional) Click
Acquisition interface. The selected tooth number is displayed on the RVG Acquisition interface.
Select the x-ray timing according to the region of interest and the patient type (follow the user
2
instructions of your x-ray generator).
To select the tooth or teeth number. Click
KODAK RVG 6500 System_User & Installation Guide (SM728)_Ed01
to return to the RVG
35