Mounting The Ips Aiming Ring On The X-Ray Generator - Kodak RVG 6500 IPS System User's Installation Manual

Mounting the IPS Aiming Ring on the X-Ray Generator

Before mounting the IPS aiming ring, make sure that:
•
You have the necessary tools:
•
You have cleaned the X-ray generator tube head with disposable cleaning wipes.
•
You have asked the practitioner his preference for the position of the aiming ring on the X-ray
tube head, with the ON/OFF button on the left or right side of the X-ray tube head.
To mount the IPS aiming ring on the X-ray generator tube head, follow these steps:
Remove the attachment brackets (A).
1
Remove the back cover.
2
Insert the 4 batteries on the board respecting the polarities.
3
A
Measure the X-ray tube head diameter to select the appropriate aiming ring holding brackets.
4
15 mm
x4
KODAK RVG 6500 System_User & Installation Guide (SM728)_Ed01
A
27