Preparing The X-Ray Generator - Kodak RVG 6500 IPS System User's Installation Manual

Preparing the X-Ray Generator

To prepare the x-ray generator, follow these steps:
Select the x-ray timing according to the region of interest and the patient type (follow the user
1
instructions of your x-ray generator).
Insert the sensor holding it horizontally in the patient's mouth. Positioning in the patient's mouth
2
depends on the region of interest.
Approach the x-ray generator tube head to the patient's chair.
3
(Optional) If you are using the IPS aiming ring system, press the ON button. If you are in front
of the aiming ring, make sure that the front LED is ON. If you are positioned in the back of the
aiming ring, a quick press on the ON/OFF button will turn on the LED on the back.
Bring the tube head in front of the aiming ring if using the RINN positioner.
4
(Optional) If you are using the IPS aiming ring system, position the X-ray generator parallel to
the active surface of the RVG sensor. When the RVG sensor is correctly centered in the ring the
centring indicator becomes a green cross.
Important: The IPS aiming ring turns off after 90 seconds.
KODAK RVG 6500 System_User & Installation Guide (SM728)_Ed01 53