Wifi Access Point Setup Configurations; Wifi Access Point Wired Configuration Setup - Kodak RVG 6500 IPS System User's Installation Manual

5
Setting Up the KODAK RVG 6500
Systems
Important: Your computer must have an Ethernet board and be WiFi
equipped before installing the KODAK RVG 6500 systems.

WiFi Access Point Setup Configurations

There are 2 WiFi access point setup configuration options:
•
The wired WiFi access point setup configuration
•
The wireless WiFi access point setup configuration
You need to decide your setup configuration before starting the WiFi setup. Once you have decided
you will be guided by the setup software (see

WiFi Access Point Wired Configuration Setup

You can choose to have a wired WiFi access point configuration. In this configuration setup, the WiFi
access point is connected to a single computer through an Ethernet cable. Several sensors can be
connected to the same access point and computer.
The transmission range between the WiFi access point and the RVG sensor is up to 10 meters.
Installing the Setup Installation Software
1 2 3 4
N ET GE AR
KODAK RVG 6500 System_User & Installation Guide (SM728)_Ed01
max. 10m
).
17