Wifi Ap Wireless Configuring Setup - Kodak RVG 6500 IPS System User's Installation Manual

WiFi AP Wireless Configuring Setup

You can chose to have a wireless WiFi access point configuration. In this configuration setup, the
computer is connected to the WiFi access point through a router, that is, through a dongle or a PCI
card. In this configuration, several sensors can be connected to the same access point and shared
between several computers and chairs.
For optimal WiFi access point wireless setup, follow these setup recommendations:
•
Place the WiFi access point in a visible and high location (not on the floor).
•
Place the WiFi access point in a central location for a multiple access point transmission.
•
Avoid any barriers along the line of transmission, for example, armored wall and door, cabinets,
effronteries and metal file cabinets.
•
Install the WiFi access point at 1 meter distance from other appliances transmitting the same
frequency range.
•
Install the WiFi access point away from electrical equipment that also generates interferences.
In this configuration, the transmission range between WiFi access point and:
•
The RVG sensor is up to 10 meters.
•
The computer is up to 10 meters.
.
18 Chapter 5 Setting Up the KODAK RVG 6500 Systems
max. 10m
max. 10m
N ET G E A R
max. 10m
max. 10m
N ET G E A R
max. 10m
max. 10m
1 2 3 4
max. 10m
max. 10m
1 2 3 4