Cleaning The Rvg Sensor Control Box; Cleaning The Positioning Accessories; Monthly - Kodak RVG 6500 IPS System User's Installation Manual

Cleaning the RVG Sensor Control Box

The RVG sensor control box must be cleaned with disposable cleaning wipes similar to those used for
the computer screens.
.
WARNING: Never immerse the RVG sensor control box in any solution.

Cleaning the Positioning Accessories

.
WARNING: Do not use chemical autoclave for the toothbrush holders
and avoid direct contact with the metallic part of the autoclave.
Table 4 Positioning Accessories Daily Maintenance Tasks
Accessories
Toothbrush holders
Bite blocks
RINN Arm & ring
IPS aiming ring

Monthly

Wipe the outer covers of the WiFi AP with a soft and dry cloth.
64 Chapter 9 Maintenance
Remove any residue with hot water and soap.
1.
2. Put the metal and plastic parts in separate sterilization pouch and
autoclave up to 132°C (273° F) before the next patient.
1. Disassemble the metal arm and the plastic ring.
Remove any residue with hot water and soap.
2.
Put the metal and plastic parts in separate sterilization pouch and
3.
autoclave up to 132°C (273° F) before the next patient.
with disposable cleaning wipes.
Wipe clean
Maintenance Tasks