Menu Commissioning / Service; Drive Commissioning - Siemens SINAMICS G130 Operating Instructions Manual

Control via the operator panel

5.5 Menu commissioning / service

5.5 Menu commissioning / service
5.5.1

Drive commissioning

This option enables you to re-commission the drive from the main menu.
Basic Commissioning
Only the basic commissioning parameters are queried and stored permanently.
Complete commissioning
Complete commissioning with motor and encoder data entry is carried out. Following this,
key motor parameters are recalculated from the motor data. The parameter values
calculated during previous commissioning are lost.
In a subsequent motor identification procedure, the calculated values are overwritten.
28
Display diagnosis
When you navigate to the required line and
then press the F5 <OK> key, the corre-
sponding faults/alarms are displayed.
The list of current faults is selected here as
an example.
Display of current faults
A maximum of eight current faults are dis-
played along with their fault number and
name of the fault.
To display additional help regarding the
cause of the problem and how to solve it,
choose F1 <Help>.
To acknowledge the faults, choose F5
<Ack.>. If a fault cannot be acknowledged,
the fault remains.
Advanced Operator Panel 30 (AOP30)
Operating Instructions, 11/2017, A5E00331451A