General - Siemens SINAMICS G130 Operating Instructions Manual

General

Description
The user-friendly AOP30 operator panel is an optional input/output device for SINAMICS
G130 converters. The operator panel can be used for commissioning, operation, and
diagnostic purposes.
The AOP30 communicates with the SINAMICS drive via a serial interface (RS232) using the
PPI protocol. The interface is a point-to-point connection. During communication, the AOP30
is the master and the connected drive is the slave.
Structure
The AOP30 is an operator panel with a graphical display and a touch-sensitive keypad. An
RS232 interface is used as the interface to the drive unit. The device can be installed in a
cabinet door (thickness: between 2 mm and 4 mm).
Features
● Display with green backlighting (resolution: 240 x 64 pixels)
● 26-key touch-sensitive keypad
● Connection for a 24 V DC power supply
● RS232 interface
● Time and date memory powered by internal battery backup
● 4 LEDs indicate the operating status of the drive unit:
– RUN: green
– ALARM: yellow
– FAULT: red
– LOCAL/REMOTE: green
Advanced Operator Panel 30 (AOP30)
Operating Instructions, 11/2017, A5E00331451A
2
13