Aaa Authentication Enable End-By-Reject - Alaxala AX3640S Software Manual

aaa authentication enable end-by-reject

Terminates authentication if an attempt to change to administrator mode (by the
is denied. If the authentication fails due to an abnormality, such as an inability to communicate, the
next authentication method specified by the
perform authentication.
Syntax
To set information:
aaa authentication enable end-by-reject
To delete information:
no aaa authentication enable end-by-reject
Input mode
(config)
Parameters
None
Default behavior
If authentication fails, regardless of the reason for failure, the next authentication method specified
by the
aaa authentication enable
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1. This command is only valid for authentication methods specified by the
enable
Related commands
aaa authentication enable
command.
aaa authentication enable
command is used to perform authentication.
4. Login Security and RADIUS or TACACS+
enable
command is used to
aaa authentication
command)
33