Error Messages Displayed By The Entry-Error Location Detection Functionality - Alaxala AX6700S Software Manual

Error messages displayed by the entry-error location detection functionality

The following table describes error messages output by the entry-error location detection
functionality (see 5.2.3 Entry-error location detection functionality in the manual Configuration
Guide Vol. 1 For Version 11.7.)
Table 1-8: List of error messages output by the entry-error location detection functionality
# Message
1 % illegal parameter at '^'
marker
2 % too long at '^' marker
3 % Incomplete command at
'^' marker
4 % illegal option at '^' marker
5 % illegal value at '^' marker
6 % illegal name at '^' marker
7 % out of range '^' marker
8 % illegal IP address format
at '^' marker
9 % illegal combination or
already appeared at '^'
marker
10 % illegal format at'^' marker
11 % Permission denied
12 % internal program error
13 % Command not authorized.
14 % illegal parameter at
'<word>' word
Description
An invalid command or parameter is
entered at .
'^'
A parameter entered at
'^'
the limit for the number of digits.
Some parameters are missing.
An invalid option is entered at
An invalid numeric value is entered at
.
'^'
An invalid name is entered at
A numeric value entered at
of the valid range.
An invalid IPv4 address or IPv6
address is entered at .
'^'
A parameter entered at has already
'^'
been entered.
The parameter entered at
'^'
invalid format.
This command cannot be executed in
user mode.
A program is faulty. Contact
maintenance personnel.
The executed command is not
authorized.
An invalid character <word>
'
entered.
<word>: Invalid word
Occurrence condition
When an unsupported command or
parameter is entered
exceeds When a parameter that exceeds the
limit for the number of digits is
entered
When some parameters are missing
. When an invalid option is entered
'^'
When an invalid numeric value is
entered
. When an invalid name is entered
'^'
is out When a numeric value that is out of
'^'
the valid range is entered
When the input format of the IPv4
address or IPv6 address is invalid
When a parameter that has already
been entered is re-entered
has an When the input format of the
parameter is invalid
When a command that can be
executed only in administrator mode
is executed in user mode.
When an invalid action other than
described above occurs
When the executed command is not
authorized by the RADIUS/
TACACS+ server via RADIUS/
TACACS+ command authorization
is When '<word>' is entered at positions
'
where a character cannot be entered
1. Reading the Manual
7