Playback Controls - Canon XF705 Instruction Manual

Playback Controls

When you play back a clip, operate the buttons on the camcorder,
the joystick and joystick guide or the supplied wireless controller.
You can press the DISP button to show/hide the joystick guide.
Refer to the following table.
Available playback types
Playback type
Fast playback
Playback at approximately 5x
the normal speed.
Frame advance/reverse
Jump back/forward within the
clip
Skip to the beginning of the
next clip
Skip to the beginning of the
current clip
Skip to the previous clip
Return to normal playback
mode
NOTES
• There is no audio during any of the playback types listed in the previous table.
• You can press the Ò button during fast playback to return to playback at normal speed.
• During some playback modes, you may notice some anomalies (blocky video artifacts, banding, etc.) in the
playback picture.
• The speed indicated on the screen is approximate.
• The amount of time equivalent to moving one frame forward is longer than moving one frame back and
depends on the video format used: approx. 0.5 seconds for XF-AVC clips and 1 second for XF-HEVC clips.
Buttons: Press the Ø or × button.
Wireless controller: Press the Ø or × button.
Joystick: During playback pause, push the joystick up or down.
Wireless controller: During playback pause, press the Ô or Ó button.
Joystick: During playback, push the joystick up or down.
You can press the FUNC button to change the jump interval between [sec] to jump 30 seconds forward/
10 seconds back, and [%] to jump 10% of the clip.
Buttons: Press the Ù button.
Joystick: Push the joystick right.
Wireless controller: Press the ß button.
Buttons: Press the Ú button.
Joystick: Push the joystick left.
Wireless controller: Press the à button.
Buttons: Press the Ú button twice.
Joystick: Push the joystick left twice.
Wireless controller: Press the à button twice.
Buttons: Press the Ò button.
Joystick: Press the joystick itself (SET button).
Wireless controller: Press the Ò button.
Operation
Playback
135